![background image](http://html1.mh-extra.com/html/omron/v700-series/v700-series_operation-manual_743606118.webp)
6-6
Section
Functions
110
After the data is written to the ID Tag, by pressing the SET Key again, the data
between the present start address and end address is written to the ID Tag
again. By pressing the INC or DEC Key, the start address and end address in-
crease or decrease by 1 each and the corresponding data is written.
Set the start address to 10h, the end address
to 1Fh, and set the data to 7F.
By pressing the SET Key, the data is written to
the ID Tag. “OK” will be displayed if the data is
written normally.
By pressing the SET Key, the data is written to
the ID Tag again.
By pressing the INC Key, the start address and
end address increase by 1 each and the
corresponding data is written to the ID Tag.
By pressing the DEC Key, the start address
and end address decrease by 1 each and the
corresponding data is written to the ID Tag.
Note Make sure that the specified data is within the memory capacity of the ID Tag.
Write Retry
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]