![background image](http://html1.mh-extra.com/html/omron/v700-series/v700-series_operation-manual_743606156.webp)
9-7
Section
Chemical Resistance of ID Tag
150
9-7
Chemical Resistance of ID Tag
The V700-D13P31 ID Tag uses PPS resin. Refer to the following and be sure not
to use any chemical that has a bad influence on PPS resin.
Chemical
Room
temperature
90
°
C
Chemical
Room
temperature
90
°
C
Hydrochloric acid
37% A
A
Sodium dichromate solution
A
A
10% A
A
Phenol solution
5% A
A
Sulfuric acid
98% A
B
Glacial acetic acid
A
A
50% A
A
Acetic acid
A
A
30% A
A
Oleate
A
A
3% A
A
Methanol (Methyl alcohol)
95% A
A
Nitric acid
60% B
C
Methanol (Methyl alcohol)
95% A
A
40% A
B
Acetic ether
A
A
10% A
A
Diethyl hexyl sebacate
A
A
Hydrogen fluoride aqueous
solution
40%
A
A
Acetone
A
A
Chromic acid
40% A
A
Diethyl ether
A
A
Hydrogen peroxide aqueous
solution
28%
A
B
n-heptane
A
A
3% A
A
2, 2, 4 trimethyl penthane
A
A
NaOH aqueous solution
60% A
A
Benzene
A
A
10% A
A
Toluene
A
A
1% A
A
Aniline
A
A
Aqueous ammonia
28% A
B
Mineral oil
A
A
10% A
B
Gasoline
A
A
Sodium chloride
10% A
A
Insulation oil
A
A
Sodium carbonate
20% A
A
Dichloroehylene
A
A
2% A
A
Carbon tetrachloride
A
A
Note
1. A: No influence
B: May discolor or melt PPS resin
C: Deform or cracks PPS resin
2. The table provides information on changes in PPS resin that are kept in the
chemical at room temperature and 90
°
C. If the actual operating conditions
of the system is different from the table data in temperature, chemical type,
or chemical viscosity, conduct a test under the actual conditions before the
system goes into actual operation.
The V700-D13P31 ID Tag is made with PBT resin (polybutylene terephthalate
resin) and epoxy resin is used for the filler resin. Refer to the following tables and
be sure not to use any chemical that affects the ID Tag’s materials.
Chemicals that Deform or Crack PBT or Epoxy Resins
PBT
Epoxy resin
Acetone, ethylene dichloride, alkali such
as sodium hydroxide
Aqua regia, chromic acid, sulfuric acid
(90% RT), nitric acid (60% RT),
ammonia solution, acetone, methylene
chloride, phenol
Chemicals that may Discolor or Melt PBT or Epoxy Resins
PBT
Epoxy resin
Hydrochloric acid (10%), acetic acid
(5%), benzene
Sulfuric acid (10% RT), nitric acid (10%
RT), concentrated hydrochloric acid,
acetic acid (50% RT), nitric acid, calcium
hydroxide, benzene, creosol, alcohol,
toluene, xylene, grease
V700-D13P31
V700-D23P41
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]