4-1
Section
Controller
47
3. Close and press the ferrite core until the ferrite core clicks so that the ferrite
core will be locked.
Ferrite core
4. If the synchronous cable is used, wind only the power supply wires around
the ferrite core as shown below.
Ferrite core
24 VDC
0 V
Wiring RESET Signal
RESET
input
24 VDC
The I/O terminals use M3 set screws. The following type of solderless terminal
can be connected to these terminals
M3
6.5 max.
I/O Solderless Terminal
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]