background image

For Customer Use
Enter below the Serial No.
w h i c h   i s   l o c a t e d   o n   t h e
bottom of the cabinet. Retain
this information for future ref-
erence.

Model No.:

IK-TF7

Serial No.:

3 CCD CAMERA

IK-TF7

INSTRUCTION MANUAL

INFORMATION
This equipment has been tested and found to comply with the limits for a Class A digital device, pursu-
ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.

USER-INSTALLER CAUTION: Your authority to operate this FCC verified equipment could be voided if
you make changes or modifications not expressly approved by the party responsible for compliance to
Part 15 of the FCC Rules.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est comforme à la norme NMB-003 du Canada.

IK-TF7(E)

2004.03.24, 0:58 PM

Page 1

Adobe PageMaker 6.5J/PPC

Summary of Contents for IK-TF7





































Reviews: