![background image](http://html.mh-extra.com/html/piaa/g3-led-bulbs/g3-led-bulbs_installation-manual_1554532001.webp)
ー1ー
PKI-0055
PKI-0055
⑤ O-ring(Red)
【2 pieces】
④ Hexagon wrench
【1 piece】
Thank you very much for purchasing PIAA product. Read this instruction
manual thoroughly for proper use of the product. After completing your
installation, please keep this manual for future reference.
For customers …………………………・ Please forward this manual to the next owner.
For installation service agents ……… Be sure to hand over this instruction manual to
the customer after installation.
※
marks and marks
in this manual indicate important notices for
installing this product. Be sure to follow these
notices in order to ensure safe and reliable work.
Indicates procedures or situations
that may cause bodily harm if used
improperly.
Indicates items that may cause
damage or abnormality to products
if used improperly.
Installation Manual for G3 LED Bulbs (Type HB3/HB4/HIR1/HIR2)
Contents
① LED bulb
(HB3/HB4/HIR1/HIR2 type)【2 pieces】
② Controller【2 pieces】
③ Tie wrap【6 pieces】
(6)Fix the controller (part②) in place on the vehicle side using the tie wraps provided (part ③).
(7) Check that the LED bulb lights up properly and make sure the light beam is not set too high or
too low. If the light beam is not properly aligned, make the necessary adjustments.
(5)Connect the vehicle's connector to the connector on the controller (Part ②) and make sure the
lamp lights up.
notch
controller (Part ②)
vehicle's connector
Viewed from the side
Harness on
vehicle side
tie wrap (part ③)
controller (part ②)
controller (Part ②)
tie wrap (part ③)
Cut
Cut
Harness on vehicle side