!
4-1
Section
Controller
44
Connection of Antenna Connector
Connection
Cable connector
1, 2, 3...
1. Hold and insert the connector into the port so that the point marked in black
on the panel of the Controller coincides with the point marked in white on the
connector.
2. Press the connector straight until the connector is locked.
Note Do not hold and press the ring of the connector, otherwise the connector is not
locked. Be sure to hold the connector.
Disconnection
Ring
Hold and pull the ring straight upwards.
Note Do not hold and pull the connector, otherwise the connector cannot be removed.
Be sure to hold the ring.
Caution
Do not pull the cable, otherwise the cable may break or be damaged.
Note Do not connect or disconnect the connector while the Controller is turned ON,
otherwise the Controller may malfunction. Do not use more than two cables (up
to 50 m total) to connect the Controller to the attached cable of the Antenna.
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
