![background image](http://html1.mh-extra.com/html/omron/v700-series/v700-series_operation-manual_743606107.webp)
6-4
Section
Connecting the Programming Console
99
6-4
Connecting the Programming Console
The Programming Console can be connected to the Controller through the
V700-P10 Programming Console Conversion Cable (sold separately). The
V700-P10 is provided with a keysheet.
6-4-1 Insertion of Keysheet
As shown in the following illustration, insert the provided keysheet into the inser-
tion slot. Then slide the keysheet downwards by pressing the keysheet with both
thumbs. Continue sliding the keysheet until the small holes on the lower part of
the keysheet are hidden by the bottom part of the slot of the Programming Con-
sole.
Note Be sure to insert the keysheet correctly, otherwise the keys of the Programming
Console may not be pressed properly.
6-4-2 Programming Console Connection Cable
A square connector and a round connector are attached to the V700-P10 Pro-
gramming Console Conversion Cable. The square connector connects to the
Programming Console and the round connector connects to the Controller.
The connector can be connected or disconnected to or from the Programming
Console regardless of whether power is being supplied to the Programming
Console.
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]