![background image](http://html1.mh-extra.com/html/omron/v690-series/v690-series_user-manual_741403094.webp)
5-9 Antenna Setting Command
5-38
5-9-4 Setting of Time to Wait Tag
Specifies time to wait for communication with a tag after issue of command when executing Auto or Repeat command. Initial value is
infinity (0000).
For the Auto command, when the waiting time for tag has been passed, the antenna returns the no-tag error response 72 and discontinues
the Auto command. For the Repeat command, when the waiting time for tag has been passed, the antenna returns the no-tag error
response 72 and continues the Repeat command.
<Command Format> * A figure below shows the number of characters.
<Response Format> * A figure below shows the number of characters.
DA
Operation mode
Destination (antenna) station number. "00" to "31". This
can be modified in "5-9-8 Station Number Setting".
Initial value "00"
Setting mode
"99"
SA
Source (host device) station number. "80" to "89". If only one host device is used, specify "80".
Command code
T4
Set value
"0000": Infinity.
"0000" to "9999": A left value x 100 msec.
Initial value
"0000": Infinity
DA
Destination (host device) station number. * In the command format, the destination is an
antenna.
SA
Source (antenna) station number.
Termination code
Fixed to "00".
Command
code
(BCC)
* It can be specified whether BCC is enab
Set value
Command
code
Termination
code
(BCC)
* It can be specified whether BCC is enabled or disabled.