![background image](http://html1.mh-extra.com/html/omron/v690-series/v690-series_user-manual_741403087.webp)
5-31
5-8-1 Auto Repeat Cancel
Cancels the Auto or Repeat command during the execution of the command. Then, an antenna waits for a command.
<Command Format> * A figure below shows the number of characters.
<Response Format> * A figure below shows the number of characters.
DA
Destination (antenna) station number. "00" to "31". This can
be modified in "5-9-8 Station Number Setting".
Initial value "00"
SA
Source (host device) station number. "80" to "89". If only one host device is used, specify
"80".
Command code
C2
DA
Destination (host device) station number. * In the command format, the destination is an
antenna.
SA
Source (antenna) station number.
Termination code
Fixed to "00".
Command
code
(BCC)
* It can be specified whether BCC is enabled or disabled.
Command
code
Termination
code
(BCC)
* It can be specified whether BCC is enabled or disabled.
5-8 Antenna Operation Command