![background image](http://html1.mh-extra.com/html/omron/v690-series/v690-series_user-manual_741403090.webp)
5-8 Antenna Operation Command
5-34
5-8-4 Request to Retransmit
Request to retransmit the immediately preceding response.
<Command Format> * A figure below shows the number of characters.
<Response Format> * A figure below shows the number of characters.
• If there is an immediately preceding response, such response is returned.
• If there is no immediately preceding response (it is not stored in an antenna), the following response is returned.
DA
Destination (antenna) station number. "00" to "31". This can
be modified in "5-9-8 Station Number Setting".
Initial value "00"
SA
Source (host device) station number. "80" to "89". If only one host device is used, specify
"80".
Command code
H1
DA
Destination (host device) station number. * In the command format, the destination is an
antenna.
SA
Source (antenna) station number.
Termination code
Fixed to "15".
Command
code
(BCC)
* It can be specified whether BCC is enabled or disabled.
Command
code
Termination
code
(BCC)
* It can be specified whether BCC is enabled or disabled.