![background image](http://html1.mh-extra.com/html/omron/v690-series/v690-series_user-manual_741403095.webp)
5-9 Antenna Setting Command
5-39
5-9-5 Command Data Response Time Setting
Specifies a minimum time until an antenna returns a response after receiving a command and a minimum time until the antenna returns
the next response after returning the last response. Initial value is 10 msec. (Refer to "Correct Usage" of (2) in Section 4-2-2.)
<Command Format> * A figure below shows the number of characters.
<Response Format> * A figure below shows the number of characters.
DA
Operation mode
Destination (antenna) station number. "00" to "31". This
can be modified in "5-9-8 Station Number Setting".
Initial value "00"
Setting mode
"99"
SA
Source (host device) station number. "80" to "89". If only one host device is used, specify "80".
Command code
H4
Command
response
Specifies a minimum time until an antenna returns a response after receiving
a command."00" to "99": A left value x 1 msec.
Initial value "10":
10 msec
Data response
Specifies a minimum time until the antenna returns the next response after
returning the last response, if the antenna returns several responses.
"00" to "99": A left value x 1 msec.
Initial value "10":
10 msec
DA
Destination (host device) station number. * In the command format, the destination is an
antenna.
SA
Source (antenna) station number.
Termination code
Fixed to "00".
Command
code
(BCC)
* It can be specified whether BCC is enabled or disabled.
Command
response
Data
response
Command
code
Termination
code
(BCC)
* It can be specified whether BCC is enabled or disabled.