![background image](http://html1.mh-extra.com/html/omron/v690-series/v690-series_user-manual_741403100.webp)
5-44
The meanings of termination code of response are described below.
Type
Termination Code
Name
Description
Normal end
"00"
Normal end
Command execution has ended correctly.
"15"
Non-executable
There is no immediately preceding response at
Request to Retransmit (Section 5-8-4).
"72"
Multi Trigger ended
Multi Trigger ended.
"74"
No polling tag communication
Communication with a tag has not yet been ended
by a polling command.
Host
communication
error
"10"
Parity error
A parity error has occurred in any character of
command.
"11"
Framing error
A framing error has occurred in any character of
command.
"12"
Overrun error
An overrun error has occurred in any character of
command.
"13"
BCC error
BCC of received command is invalid.
"14"
Format error
A format of a command received properly is incor-
rect.
"15"
Non-executable
A received command cannot be executed in a
current mode.
"18"
Frame length error
ETX more than 8220 characters is not received
after STX is received.
Communication
error
"70"
Communication error
An error has occurred during the communication
with a tag and the communication cannot be com-
pleted correctly.
"71"
Verification error
Writing was not performed correctly. An data
error was detected at writing verification.
"72"
No-tag error
There is no tag in front of a tag when the Trigger
command is executed. Waiting time for a tag has
passed in the Auto Repeat command.
"7A"
Address error
Memory address of inexistent ID tag was desig-
nated.
"7B"
Battery voltage low
Voltage of battery built in an ID tag dropped.
"7D"
Write Protect error
Something was written into a write-protected
page.
System error
"92"
Antenna failure
Failure of radio wave transmitter, etc. or an error
in a program in an antenna.
"93"
Tag memory error
An ID tag data error was detected at data reading.
Correct Usage
When a communication error or verification error has occurred at the execution of Write command, data of address des-
ignated by the command may be rewritten partially or completely.
5-10 Termination Code List