ANT3036W / ANT3036X
Outdoor Antenna
User’s Guide
Step 1: Unpack
Remove all three sections of the antenna and the hardware bag from
package. Make sure the following parts are in the package:
• 3 antenna sections
• Hardware bag
U-Bolt
Transformer
Mast Clamp Insert
(4) Plugs
(4) 10/32” Hex nuts
(2) 1/4” Hex Nuts
Matching
(8) 7/16” Washers
• 58” mast (ANT3036W only)
Middle
section
Step 2: Unfold the middle section
Find the middle section of the antenna
(illustrated on the left).
Starting from the rear of the middle section,
unfold the long VHF Elements until they lock
into place (as illustrated below).
Turn the middle section over and unfold the
shorter elements on the other side.
Rear
BEFORE YOU START!!!
Please read the IMPORTANT SAFETY INFORMATION sheet
included in this package.
Back
Middle
Front
