![background image](http://html1.mh-extra.com/html/omron/v690-series/v690-series_user-manual_741403042.webp)
4-1 Read/Write Antenna and ID Tag
4-7
4-1-5 How to Connect Connecting Cable to Antenna
To connect an antenna and host device, use a connecting cable (unbundled).
RS-232C connecting cable
V690-A4
!
* Refer to Section 2-4.
RS-422A/485 link unit connecting cable
V690-A5
!
* Refer to Section 2-4.
(1) When you connect a connector of dedicated cable and connector of antenna, be sure to hold those connectors and insert them into
each other completely.
(2) When you have connected the connectors, turn a ring completely as shown below.
Correct Usage
• Do not connect nor disconnect the connectors when the power supply turns on. Otherwise, a trouble is caused.
• Do not pull the cable by force.
• Do not touch a connecting terminal of the connector.
• Do not touch the connector during an operation.
Dedicated cable
Antenna side
Ring