![background image](http://html1.mh-extra.com/html/omron/v690-series/v690-series_user-manual_741403093.webp)
5-9 Antenna Setting Command
5-37
5-9-3 Radio Wave Output Status Read
Selects a communication range mode and radio wave channel of an antenna.
<Command Format> * A figure below shows the number of characters.
<Response Format> * A figure below shows the number of characters.
DA
Operation mode
Destination (antenna) station number. "00" to "31". This
can be modified in "5-9-8 Station Number Setting".
Initial value "00"
Setting mode
"99"
SA
Source (host device) station number. "80" to "89". If only one host device is used, specify "80".
Command code
A6
DA
Destination (host device) station number. * In the command format, the destination is an
antenna.
SA
Source (antenna) station number.
Termination code
Fixed to "00".
Communication range
L: Communication range 2 m mode
H: Communication range 5 m mode
Radio wave channel
Divides the frequency range 2437.5 to 2462.5 MHz into ten.
Command
code
(BCC)
* It can be specified whether BCC is enabled or disabled.
Command
code
Termination
code
(BCC)
* It can be specified whether BCC is enabled or disabled.
Radio wave channel
Communication range