background image

 

Optional Outdoor Antenna

 

Installation Instructions

 

 

 

For safety and optimum performance, be sure to read these instructions 
carefully.

 

 

 

Warning

 

 

For your safety, keep the antenna away from electric power lines to avoid 

electric shock. 

 

Install the antenna in good weather when there is no risk of lightning strikes. A 

Lightning protection kit should be installed by a professional installer following 
applicable  national  and  local  electrical  to  prevent  injury  or  damage  caused  by 
lightning. 

 

For FCC compliance, the outdoor antenna must not be located within 8 inches 

(20cm) of any person. 

 

 

Site Selection

 

 

The higher the antenna is installed, the better the communication will be. If you 

can install the antenna higher than surrounding obstructions, the 
communication range will be better. 

 

The antenna must be on the roof and maintain a three meter (10 feet) 

clearance in all directions to meet RF safety requirements. 

Summary of Contents for AK10

Page 1: ...talled by a professional installer following applicable national and local electrical to prevent injury or damage caused by lightning For FCC compliance the outdoor antenna must not be located within 8 inches 20cm of any person Site Selection The higher the antenna is installed the better the communication will be If you can install the antenna higher than surrounding obstructions the communicatio...

Page 2: ...de pipe and bracket on mast firmly Fit the guide pipe and bracket on mast firmly 4 Thread the coaxial cable through the guide pipe and connect one end of the coaxial cable to the antenna 5 Connect the other end of the coaxial cable to the base station Note Use only EnGenius antenna and cable The base station antenna connector has reverse thread that only works with cables supplied by EnGenius whip...

Page 3: ... in contact with any liquids Do not use liquids or aerosol sprays for cleaning Use only a damp cloth when cleaning Do not plug the product back in until it has dried thoroughly 6 Install this product in a protected location where it is not at risk of falling and no one can trip over and line or power cord Protect cords from damage or fraying Do not place and objects on the power cord 7 This produc...

Page 4: ... or removing cabinet parts other than specified access doors may expose you to dangerous voltages or other risks Incorrect reassembling can cause electrical shock when the appliance is subsequently used 12 Do not overload wall outlets and extension cords as this ca result in the risk of fire or electrical shock 13 Unplug this product from the wall outlet if any of the following situations should o...

Reviews: