background image

Mounting Instruction

Release 02 06/10

Technical Support

[email protected]

Mounting Instruction

Omnidirectional antenna for 5 GHz band
BAT-ANT-N-5A-IP65

Safety instructions

General instructions

If exposed to extreme environmental conditions, especially icy conditions 
or a polluted atmosphere, the connectors should be covered with a self-
vulcanizing tape or a cold shrink tube.

Disclaimer

All pertinent country, state, regional, and local safety regulations must be 
observed when installing and using this product. For reasons of safety 
and to help ensure compliance with documented system data, only the 
manufacturer should perform repairs to components. This equipment 
must only be installed and serviced by qualified personnel.

 WARNING

ELECTRIC SHOCK OR FALLING

Avoid mounting the antenna near power lines.

When installing an antenna from a ladder or elevating equipment, take 
precautions to avoid falling and ensure the equipment is securely positioned 
on solid ground.

Failure to follow these instructions can result in death, serious injury, 
or equipment damage.

Reviews: