101
RFID System
Operation Manual
Se
ct
io
n 5
Communica
tions
Comma
nds
Section 5
Communications
■
1:N Communications
Data code specification
Specifies the type of code in which to send the read data in the response.
A: ASCII
H: Hexadecimal
R/W Head No.
Specifies the Read/Write Head with which to communicate.
1: Read/Write Head 1
2: Read/Write Head 2
Write area start address
Specifies the first address to which to write data to the Data Carrier as a four-digit hexadecimal
number.
Specifiable range: 0000H to FFFFH
No. of write bytes
When specifying in odd bytes, this writes the 1 digit prior to the designated data for ASCII code
specification, or the 2 digits of the designated data for hexadecimal specification, to the last 1 byte
of data in the Data Carrier.
Specifiable range: 01H to FFH, 00H (The maximum of 256 bytes will be written if 00H is specified.)
Specified data
The data to write to Data Carrier memory.
• ASCII specification: Specify 2 bytes.
• Hexadecimal code specification: Specify 4 bytes.
End code
Indicates the results of command execution. An end code of 00 is returned for a normal end.
Refer to
for more information.
x
x
D
F
x
x
A / H
x
x
2
1
1
4
2
1 / 2
x
x
x
x
2 or 4
3
2
*
C R
2
x
x
F C S
Controller No.
x
@
x
No. of write
bytes
Specified data
Terminator
Command code
Write area start address
Data code
specifica-
tion
R/W Head No.
Command
Response
Command code
D
F
0
0
2
2
2
*
CR
Terminator
End code
2
x
x
FCS
3
Controller No.
x
@
x
Summary of Contents for V600 Series
Page 50: ...48 Section 2 Wiring RFID System Operation Manual Section 2 Installation and Wiring MEMO ...
Page 72: ...70 Section 4 Write Command Memory RFID System Operation Manual Section 4 Function ...
Page 138: ...136 Section 5 End Codes RFID System Operation Manual Section 5 Communications MEMO ...