![background image](http://html.mh-extra.com/html/omron/v600-series/v600-series_user-manual_743003037.webp)
35
RFID System
Operation Manual
Sect
ion 2
Wiring
Section 2
Installation and Wiring
2.
Connecting the Series A Connector to the Host Device
Align the connectors in the proper orientation and press straight in.
3.
Removing the Connector from the Host Device
Close the software application at the host device and then pull the connector
straight out.
If the connector is removed while the software running at the host
device, operation may stop due to a software malfunction.
■
Attaching a Ferrite Core
USB connections can be easily affected by noise.
Use the following ferrite core to increase noise immunity.
1.
Attach the above ferrite core to the USB cable.
Attach the ferrite core to the end of the cable with the mini USB series B connec-
tor. Press the ferrite core closed until you hear it click into place. The ferrite core
should be located about 10 cm or less from the connector.
Manufacturer
Model
SEIWA
E04SR301334
10 cm max.
Summary of Contents for V600 Series
Page 50: ...48 Section 2 Wiring RFID System Operation Manual Section 2 Installation and Wiring MEMO ...
Page 72: ...70 Section 4 Write Command Memory RFID System Operation Manual Section 4 Function ...
Page 138: ...136 Section 5 End Codes RFID System Operation Manual Section 5 Communications MEMO ...