![background image](http://html.mh-extra.com/html/omron/v600-series/v600-series_user-manual_743003029.webp)
27
RFID System
Operation Manual
Sect
ion 2
Wiring
Section 2
Installation and Wiring
RS-232C Port
■
Pin Arrangement
■
Connecting to the Host Device
■
Connection Example to OMRON PLC
Recommended Cable
■
Connection Example to DOS Computer (IBM PC/AT or Compatible)
(This example uses a 9-pin D-Sub connector.)
Recommended Cable
For 1:N connections, refer to
Connecting between ID Controllers (1:N Connections)
Model
Manufacturer
XW2Z-
@@@
T
OMRON
Note 1. Ground the shield at the host device to prevent malfunctions.
2. Pins 4 (RS) and 5 (CS) are connected inside the connector.
Model
Manufacturer
XW2Z-
@@@
S-V
OMRON
Note 1. The ID Controller connector on the interface cable is male
and the computer connector is female.
2. Ground the shield at the host device to prevent malfunctions.
Pin No.
Abbre-
viation
Signal direction
Signal name
Input
Output
9
SG
---
---
Signal ground or common
return line
2
SD
---
❍
Send data
3
RD
❍
---
Receive data
4
RS
---
❍
Request to send
5
CS
❍
---
Can send
5
1
9
6
(The example at the left is for connecting a shielded cable to the host device.)
• Pin Arrangement
ID Controller
Host device
Shield
GR
SG
SD
RD
RS
CS
GR
SG
RD
SD
RS
CS
ID Controller
IBM PC/AT or compatible
(Shield)
GR
SG
SD
RD
RS
CS
GR
SG
RD
SD
RS
CS
Summary of Contents for V600 Series
Page 50: ...48 Section 2 Wiring RFID System Operation Manual Section 2 Installation and Wiring MEMO ...
Page 72: ...70 Section 4 Write Command Memory RFID System Operation Manual Section 4 Function ...
Page 138: ...136 Section 5 End Codes RFID System Operation Manual Section 5 Communications MEMO ...