NEC MobilePro 900 Release Notes 1
NEC MobilePro 900
Release Notes
Congratulations on purchasing an NEC MobilePro 900™ Handheld PC. Before
using your MobilePro 900, please read the following important information. This
information includes:
!
Installing the NEC USB Synchronization (Sync) drivers from the NEC
MobilePro 900 Application and Driver CD
!
Connecting a device to the USB port on the MobilePro 900
!
Connecting an optional headphone to the MobilePro 900
!
Opening WESTTEK™ JETCET™ PRINT Help
!
Installing BSQUARE
®
bUSEFUL™ Backup and bFAX™ applications
!
Installing wireless LAN (WLAN) CompactFlash™ (CF) drivers.
Installing the NEC USB Sync Drivers
NEC USB Sync drivers are required to recognize the NEC MobilePro 900 when
the MobilePro is connected to the host PC via a USB cable. The NEC USB Sync
drivers come on the NEC MobilePro 900 Application and Driver CD.
Use the following procedure to install the drivers on the host/companion PC.
Note
The following procedure replaces the section “Loading USB Files” in
Chapter 1 of the NEC MobilePro 900 User’s Guide.
1.
Insert the NEC MobilePro 900 Application and Driver CD in the
CD-ROM drive of your host PC.
!
If auto-insert is enabled on your host PC, the CE Setup menu
appears.
!
If auto-insert is not enabled, go to Start, Run, and browse for the
CD-ROM drive.
2.
Select “P900 Drivers” from the displayed menu.
3.
Follow the on-screen instructions to complete the driver installation.
