NEC MobilePro 900c
Release Notes
Congratulations on purchasing an NEC MobilePro™ 900c Handheld PC. Before
using your MobilePro 900c, please read the following important information.
Installing the NEC USB Sync Drivers
NEC USB Sync drivers are required to recognize the NEC MobilePro 900c when
the MobilePro is connected to the host PC via a USB cable. The NEC USB Sync
drivers come on the NEC MobilePro 900c Application and Driver CD.
Use the following procedure to install the drivers on the host/companion PC.
Note
The following procedure replaces the section “Loading USB Files” in
Chapter 1 of the
NEC MobilePro 900c User’s Guide
.
1.
Insert the NEC MobilePro 900c Application and Driver CD in the
CD-ROM drive of your host PC. If auto-insert is enabled on your host
PC, the CE Setup menu appears. If auto-insert is not enabled, go to Start,
Run, and browse for the CD-ROM drive.
2.
Select “NEC 900 Drivers” from the displayed menu.
3.
Follow the on-screen instructions to complete the driver installation.
4.
Connect the USB PC Link cable from the MobilePro 900c to the host PC.
Microsoft
®
Windows
®
now detects the new hardware (USB device).
5.
Click Next to install the USB drivers. The installation prompts you for the
wceusbsh.sys
file.
6.
Browse to the
system32\drivers\
directory within Windows.
7.
Select the
wceusbsh.sys
file and click “Open” to complete the driver
installation.
Connecting to ActiveSync via the Network
To connect to ActiveSync
®
using a network connection, do the following:
Check that the MobilePro is already partnered with the host system.
Make sure the MobilePro and the host system are on the SAME network.
Ensure that Outlook is open on the host system BEFORE
synchronization.
To connect to ActiveSync using the network, click the
Start
button and select
Run
.
Type
repllog.exe /remote
.
1
