13
RFID System
Operation Manual
Section 1
Names
and Fun
ct
io
ns of
Compo
nent
s
Section 1
Product Overview
Names and Functions of Components
■
Power Supply and Ground Terminals
■
External I/O Port
Connect the external I/O port to the external I/O signals.
Name
Description
Power supply terminals
Supply 24 VDC.
Recommended power supply: S8VS-03024 (manufactured by OMRON)
Ground terminal
This is the ground terminal. Connected a dedicated ground line grounded to 100 W or less.
Name
Description
RUN
Turns ON when the ID Controller is operating normally and communications are possible with the
host device.
BUSY
Output from when a command is received from the host device until communications have been
completed.
ERROR
Output for 500 ms when there is an error in Data Carrier communications, host device communica-
tions, or hardware. The output time can be changed with the SET PARAMETER (SP) command.
OUT1
User output 1, which can be manipulated using the CONTROL CONTROLLER (CC) command.
OUT2
User output 2, which can be manipulated using the CONTROL CONTROLLER (CC) command.
COM_O
The output common terminal.
RST
An external reset input for emergency stopping. The ID Controller will be reset when RST is input.
TRG/IN1
If pin 4 of SW4 (lower trigger setting) is ON, a RECEPTION COMPLETED command is executed
for Read/Write Head 1 on the rising edge of this input. If pin 4 of SW4 is OFF, this input is used as
user input 1, which can be read with the CONTROL CONTROLLER (CC) command.
TRG/IN2
If pin 4 of SW4 (lower trigger setting) is ON, a RECEPTION COMPLETED command is executed
for Read/Write Head 2 on the rising edge of this input. If pin 4 of SW4 is OFF, this input is used as
user input 2, which can be read with the CONTROL CONTROLLER (CC) command.
COM_I
The input common terminal.
USB port
RS-422/RS-485 port
Power supply terminals
Ground terminal
RS-232C port
Switch cover
Main display indicators
Monitor display
Read/Write Head
connection port
External I/O port
Head operation indicators
Controller
number switches
Mode switch
Terminating resistance switch
Summary of Contents for V600 Series
Page 50: ...48 Section 2 Wiring RFID System Operation Manual Section 2 Installation and Wiring MEMO ...
Page 72: ...70 Section 4 Write Command Memory RFID System Operation Manual Section 4 Function ...
Page 138: ...136 Section 5 End Codes RFID System Operation Manual Section 5 Communications MEMO ...