15
RFID System
Operation Manual
Section 1
Names
and Fun
ct
io
ns of
Compo
nent
s
Section 1
Product Overview
■
Main Display Indicators
■
Head Operation Indicators
■
Monitor Display
■
End Code Display Mode (Pin 3 of SW4 Turned OFF)
The end code for command processing is displayed. End codes are displayed with two hexadecimal
digits, as shown below.
For normal responses or warning responses, the display lights. For error responses, the display
flashes.
■
I/O Display Mode (Pin 3 of SW4 Turned ON)
The monitor display will show the ON/OFF status of the I/O terminals or the error status.
The segments will be light when the I/O is ON and not lit when the I/O is OFF, as shown below. Error
displays will light when the error occurs and then go out after a short period of time.
Name
Color
Description
RUN/RST
Green Lit when the ID Controller is operating normally.
Red
Lit when the external reset input is received.
COMM
Green Lit when communicating normally with the host device.
Red
Lit when an error is detected in communications with the host device.
Name
Color
Description
COMM1
Yellow Lit when a communications command for a Data Carrier is being processes for Read/Write Head 1.
NORM1/ERR1
Green Lights once at a normal end to processing for Read/Write Head 1.
Red
Lights once at an error end to processing for Read/Write Head 1.
COMM2
Yellow Lit when a communications command for a Data Carrier is being processes for Read/Write Head 2.
NORM2/ERR2
Green Lights once at the end of normal processing for Read/Write Head 2.
Red
Lights once at an error end to processing for Read/Write Head 2.
Name
Color
Mode
Description
7-segment display
(2 digits)
Red
RUN mode, end code display
The end code is displayed.
RUN mode, I/O display
User I/O status is displayed.
MAINTENANCE mode
The end code is displayed.
Hex
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
Display
Channel 1 communications indicator
Channel 2 communications indicator
RUN
TRG/IN1
TRG/IN2
BUSY
ERROR
Channel 1 error indicator
Channel 2 error indicator
OUT2
OUT1
Input status indications
Output status indications
Summary of Contents for V600 Series
Page 50: ...48 Section 2 Wiring RFID System Operation Manual Section 2 Installation and Wiring MEMO ...
Page 72: ...70 Section 4 Write Command Memory RFID System Operation Manual Section 4 Function ...
Page 138: ...136 Section 5 End Codes RFID System Operation Manual Section 5 Communications MEMO ...