![background image](http://html1.mh-extra.com/html/omron/sysmac-e3x-ect/sysmac-e3x-ect_operation-manual_742296041.webp)
4 Installation and Wiring
4 - 2
E3X-ECT EtherCAT Sensor Communication Unit Instraction Manual
4-1
Mounting E3X-ECT and Sensor
Amplifiers
This section explains the mounting methods of E3X-ECT and Sensor Amplifier to the DIN track.
1. Hook the top side of groove on backside of the Slave Unit to
the top side of the DIN track.
2. Push bottom side to DIN track
3. Release the cover of E3X-ECT right side. Slide sensor
amplifiers and connect each other securely.
4. Set end plates each side, at last set the cover at 3. to the last
amplifier.
Precautions for Safe Use
After the operation, make sure to check that the Slave
Unit is securely mounted.
4-1-1
Mounting Method
通信ユ ニ ッ
N
ー
押 し 付 け る
セ ン サ ア ン プ ユ ニ ッ
通信ユ ニ ッ
エ ン
プ
ー
Summary of Contents for Sysmac E3X-ECT
