Omron SYSMAC CJ1W-PRM21, Operation Manual

Page: 7 / 190

ix
About this Manual
This manual describes the CS1W-PRM21 and CJ1W-PRM21 PROFIBUS-DP Master Units. It also
describes how to install and operate them. Both Units serve the same purpose: enable devices of var-
ious manufacturers to intercommunicate without making any special interface adaptations. They are
technically the same; they differ only in their physical dimensions and weight and the way they are con-
nected to the backplane.
Please read this manual carefully so that you understand the information provided before installing or
using the PROFIBUS-DP Master Unit. Start with the precautions in the following section. They
describe the operating environment and application safety measures which must be observed prior to
and when using the PROFIBUS-DP Master Unit.
The sections of this manual are as follows:
Section 1 introduces the PROFIBUS-DP Master Units and CX-Profibus.
Section 2 describes the installation and setup of the PROFIBUS-DP Master Units.
Section 3 describes the installation of CX-Profibus and provides a overview.
Section 4 describes how the Units interface to the PLC CPU.
Section 5 describes the FINS commands supported by the PROFIBUS Master Units.
Section 6 describes the operational aspects of the PROFIBUS Master Units.
Section 7 provides procedures for troubleshooting the PROFIBUS-DP network and the Units.
The Appendices contain information supplementary to the information in the main body of the man-
ual. They are referred to in the various sections as required.
Manual Products Contents Cat. No.
CS-series
Programmable Controllers
Operation Manual SYSMAC CS-series
CS1G/H-CPU@@-E Describes the installation and opera-
tion of the CS-series PLCs. W339-E1-@
CJ-series
Programmable controllers
operation Manual SYSMAC CJ-series
CJ1G-CPU@@ Describes the installation and opera-
tion of the CJ-series PLCs. W393-E1-@
CS/CJ-series
Programmable Controllers
Programming Manual SYSMAC CS/CJ-series
CS1G/H-CPU@@-E, CJ1G-
CPU@@ Describes the ladder diagram pro-
gramming instructions supported by
CS/CJ-series PLCs. W394-E1-@
CS/CJ-series
Programmable Controllers
Instructions Reference Manual SYSMAC CS/CJ-series
CS1G/H-CPU@@-E, CJ1G-
CPU@@ Describes the ladder diagram pro-
gramming instructions supported by
CS-series and CJ-series PLCs. W340-E1-@
CS/CJ Series Communication
Commands Reference Manual SYMAC CS1G/H-CPU@@-E
CPU Units Describes the C-series (Host Link) and
FINS communications commands
used with CS/CJ-series PLCs. W342-E1-@
CX-Programmer
Operation Manual SYSMAC WS02-CXP@@-E
CX-Programmer Provides information on how to use the
CX-Programmer, programming soft-
ware which supports CS1/CJ1-series
PLCs. W414-E1-@
CX-Server
Run Time User Manual CX-Server Provides information on how to use the
CX-Server communication driver soft-
ware which supports CS1/CJ1-series
PLCs. W391-E2-@