Omron SYSMAC CJ1W-PRM21, Operation Manual

Page: 38 / 190

24
Unit Components
Section 2-1
2-1 Unit Components
2-1-1 Nomenclature
The illustration below shows the Status LED indicators, the Unit number
selector switch, and a 9-pin female sub-D connector on the front side of the
CS1W-PRM21 and the CJ1W-PRM21 Units. Each of these components are
explained in the following sections
Indicators
Unit number switch
This switch sets the Unit Number of the
PROFIBUS-DP Master Unit as a one-digit
hexadecimal number
PROFIBUS-DP Connector
9-Pin Sub-D, female connector, #4/40 UNC thread
Connect the PROFIBUS-DP network cable to this
connector. Termination must be provided with the
cable connector
CS1W-PRM21
CJ1W-PRM21
ERC RUN
BF
PRM21
COMM
BST ERH
PRM
NO.
UNIT
01
2345678
9ABC
DE
F
BUS
Indicators
Unit number switch
This switch sets the Unit Number of the
PROFIBUS-DP Master Unit as a one-digit
hexadecimal number
PROFIBUS-DP Connector
9-Pin Sub-D, female connector, #4/40 UNC thread
Connect the PROFIBUS-DP network cable to this
connector. Termination must be provided with the
cable connector
PRM21
CS CS
UNIT
No.
FEDC
BA987
654
3210
RUN RUN
ERC ERC
BST BST
BF BF
ERH ERH
PRM PRM
COMM COMM
BUS