Omron SYSMAC CJ1W-PRM21, Operation Manual

Page: 132 / 190

118
Configuring the Slave Stations
Section 6-3
In the figure above, the parameter captions are listed in the left column and
the options can be set in the right column. In order to change settings, double-
click the required parameter row with the left mouse button. Depending on the
parameter type, either a drop-down lists will become available for selection or
a value can be entered.
Note Readable captions and/or convenient selection items are not always provided
with the parameters. Depending on the slave and the GSD file implementa-
tion, setting the parameter values may require the help of the user documen-
tation for that slave.
Example When done, making the Parameter settings, press the Apply button at the
bottom of the window. Next, select the Group tab, to make the necessary
Group assignment.
6-3-3 Selecting the Group Assignment
The group assignment is sent to the slave devices as part of the parameter
message. The group assignment is used as an address within the
Global_Control command message, to address a specific group of slaves, or
all slaves.