Omron SYSMAC C200H-IDS01-V1, Operation Manual

Page: 85 / 114

70
Timing Considerations
Section 3-3
3-2-10 Error Codes
3-3 Timing Considerations
This section covers command processing time, which is the time required for
data communication between the Data Carrier and ID Sensor Unit; and turn-
around time, which is the time required by the PC to retrieve a command and
complete the reading/writing of data from/to the Data Carrier.
Use the following table and graph to calculate the amount of time required for
executing commands involving data communication between the ID Sensor
Unit and Data Carrier.
3-3-1 Command Processing Time
Command Processing Time is the time required for data communication
between the CPU, ID Sensor, and Data Carrier.
The following graphs show the relationship between the quantity of data to be
processed and the time required for processing a command.
Error code
number
Error name Error message
70 Data carrier communicatin error COM.DC E
71 Data verification error VERIFY E
72 No Data Carrier error NO DC E
7A Data Carrier address error ADRS E
7C Read/Write Head (or Antenna) disconnect error R/W H E
7D Wrire protect error PROTCT E
STA.ERRORS INF.
NO ERROR
HEAD 1 PAGE 1
STadrs1F data 29
RESET
If an er-
ror did
not occur
If no errors have occurred, this mes-
sage will be displayed.
To start another operation or abort
the Error Log operation, press the
RESET key and the display will
return to reset status.
C200H-IDS01-V1
2,000
6,000
4,000
1,000
600
400
200
100
60
40
20
10
1 2 4 6 10 40 60100 200 1,000 20
Amount of data (bytes)
2,000
6,000
4,000
1,000
600
400
200
100
60
40
20
10
1 2 4 6 10 40 60100 200 1,000 20
Amount of data (bytes)
C200H-IDS21
Processing time (ms) Processing time (ms)