Omron SYSMAC C200H-IDS01-V1, Operation Manual

Page: 71 / 114

56
Monitoring
Section 3-2
Note 1. The number “1” need not be changed or reset, unless otherwise instructed
or necessary.
2. The C200H-IDS01-V1 indicates “HEAD 1” while the C200H-IDS21 indi-
cates “ANT.1”. Throughout this section, “HEAD 1” is displayed on the
screen, but “ANT.1” will be displayed when the C200H-IDS21 is used.
3. The address page number must be set in hexadecimal on the C200H-
IDS01-V1 and decimal on the C200H-IDS21.
3-2-3 The JOB Function
Use the JOB operation when the current address page number must be
changed.
The JOB operation can also be used to set a Read/Write Head (or Antenna)
wordnumber and address page number. However, since the Read/Write Head
(or Antenna) word number is already fixed to 1, no word number has to be set.
Address Page Numbers There are 2K bytes of addresses in the Data Carrier.
Address Page Number
Address
range
0 1 2 3 4 5 6 7
000
through
0FF 100
through
1FF 200
through
2FF 300
through
3FF 400
through
4FF 500
through
5FF 600
through
6FF 700
through
7FF
8 9 A B C D E F
800
through
8FF 900
through
9FF A00
through
AFF B00
through
BFF C00
through
CFF D00
through
DFF E00
through
EFF F00
through
FFF
10 11 12 13 14 15 16 17
1000
through
10FF 1100
through
11FF 1200
through
12FF 1300
through
13FF 1400
through
14FF 1500
through
15FF 1600
through
16FF 1700
through
17FF