Omron SYSMAC C200H-IDS01-V1, Operation Manual

Page: 77 / 114

62
Monitoring
Section 3-2
3-2-5 Read
This operation reads 1 byte of data from a specified address in the Data Car-
rier. Refer to the following figure.
Before performing this operation, select the address and data you want to
read. Refer to
3-2-4 Address/Data Setting for details .
HEAD 1 PAGE 1
STadrs1F data 00
HEAD 1 PAGE 1
RDadrs1F data
HEAD 1 PAGE 1
RDadrs1F data CS
HEAD 1 PAGE 1
RDadrs1F NO DC E
HEAD 1 PAGE 1
RDadrs1F error 72
HEAD 1 PAGE 1
STadrs1F data C8
start
address
setting
start address (read address)
Indicates that Read will be executed.
Read data
Error message
or
Error code number
Press the READ key; the data in
the specified start address will be
read.
Set the start address from which
the data is to be read.
When the read operation has
been completed, the read data is
displayed.
If an error has occurred during
the READ operation, the buzzer
will sound for 2 seconds, and an
error message will be displayed
(refer to ).
To perform another operation or
to abort the READ operation,
press the RESET key. The dis-
play will return to the reset dis-
play. In this example, the display
indicates the reset status. Anoth-
er operation can now be
performed.
Pressing the left or right arrow
key will toggle the display
between the error message and
the corresponding error code.
RESET
READ
Normal
completion
When an
error occurs
3-2-10 Error Codes