Omron SYSMAC C200H-IDS01-V1, Operation Manual

Page: 78 / 114

63
Monitoring
Section 3-2
3-2-6 Step Write (WRITE 1)
This operation writes 1 byte of specified data to a specified address in the
Data Carrier. Refer to the following figure.
Before performing this operation, select the address and the data you want to
write. Refer to
3-2-4 Address/Data Setting for details .
HEAD 1 PAGE 1
STadrs1F data 83
HEAD 1 PAGE 1
SWadrs1F data
HEAD 1 PAGE 1
SWadrs1F data 83
HEAD 1 PAGE 1
SWadrs1F NO DC E
HEAD 1 PAGE 1
SWadrs1F error 72
HEAD 1 PAGE 1
STadrs1F data 83
start
address/
data setting
start address
(write address)
Indicates that Step Write will be exe-
cuted.
Data to be written
Error code number
Normal
completion
When an
error occurs
Data to
be written
Press the WRITE 1 key to
write the data to the start
address and begin the Step
Write operation.
Set the data to be written and
the address in the Data Car-
rier the data is to be written to.
If the data is written correctly,
it is displayed as shown in
the example.
To perform another opera-
tion, or to abort the Step
Write operation, press the
RESET key. The display will
return to the reset status. In
this example, the display
indicates the reset status
.
Another operation can now
be performed.
If an error occurs during the
operation, the buzzer sounds
for 2 seconds, and an error
message is displayed (refer to
).
Pressing the left or right ar-
row key will toggle the dis-
play between the error mes-
sage and the corresponding
error code.
or
RESET
1
WRITE
Error message
3-2-10 Error Codes