Omron SYSMAC C200H-IDS01-V1, Operation Manual

Page: 44 / 114

29
The User Program
Section 2-3
When the command is executed and the address is found to have been over-
written for the number of operations set by the user, the Data Carrier warning
flag will be turned ON.
Command Processing: Overwriting operation management area consists of three bytes from the first
address, from which the appropriate number is subtracted. If the value set in
this area is smaller than 0, the Data Carrier warning flag will be turned ON. If
the data in the management area is already 0, the value in the overwriting
operation management area will not be renewed.
When using a DC with the number of overwriting operations set to 300,000,
make the settings as shown below.
2-3-2 Data Carrier Memory
The ID Sensor Unit has a memory access space of 64k bytes (0000 to FFFF),
the accessible space of which is decided according to the memory capacity of
the Data Carrier. The production year and month area, the write protection
area of the ID Sensor Unit, and the processing methods of the areas vary with
the memory capacity of the Data Carrier, the details of which are explained
below.
First address
Upper digit
Middle digit
Lower digit
3 bytes
First address
3 bytes
04
93
E0
Upper digit
Middle digit
Lower digit