Omron NT11 - 01-2004, User Manual

Page: 76 / 186

63
Operation Modes and the System Menu
Section 3-3
Basic key operations in the maintenance mode
Note that on the screen for confirming erasure of the system program, the
“Cancel” and “Set/execute” keys are displayed in reverse video in order to pre-
vent mistaken deletion of the program.
Selecting the Menu Items Press the or key on the panel of the NT11 to move the highlighting up
or down. When the required item is highlighted, press the “ENTER” key to
select it.
Menu items allow to make the ON/OFF selection or to call subsequent menu
or screen.
Example 1
To call the “Maintenance Mode Menu” by selecting the “Maintenance Mode”
on the System Menu screen:
System Menu Items The System Menu items and their functions are given below.
Switching from the System Menu to the RUN mode
The NT11 will exit the System Menu and switch to the RUN mode in the cases
mentioned below.
• Selecting “Quit” in the System Menu.
• The screen (System keys) is not pressed for over 10 seconds.
Operation Function
Any two function keys Cancel
[ENTER] key Set/execute
Arrow keys Cursor motion
[System Menu]
Quit
Transmit Mode
Maintenance Mode
1.0
PT Setting
I/O Check
Initialize Memory
Memory Switch
Select “Maintenance
Mode” with the key,
then press “ENTER”.
Menu Item Function
Quit The System Menu screen is cleared and the NT11 will return to the
RUN mode.
Transmit
Mode The Transmit Mode screen will be displayed to allow the transmission
of the screen data between the NT11 and the support tool. For the
transmission of the screen data, refer to
3-6 Registering the Screen
Data (page 69).
Maintenance
Mode The Maintenance Mode menu will be displayed to allow the mainte-
nance of the NT11 system.