Omron NT11 - 01-2004, User Manual

Page: 25 / 186

12
Before Operating
Section 1-6
[Example of the PT status notify area application]
When a change is made in the NT11 status, such change will be notified to
the PT status notify area as mentioned below.
1-6 Before Operating
Follow the procedure given below to start the system of the NT11.
Numeral memory table entry 13
PT status notify area
Content update memory table entry
PT status
Start
Start + 1
NT11 PLC
12345678 12345678
12345678
Currently display screen
Allocated word (numeral table 13)
PLC NT11 Support tool
Check and change the
PLC settings.
Connect to the NT11.
Create the PLC program.
Set the DIP switches.
Install to the operation
panel.
Connect the power sup-
ply.
Connect to the PLC.
Check the settings and
communications.
Transfer the
screen data.
Transfer the system
program by using the
system transfer tool.
(refer to Section 4 and the
manuals for the support tools)
Create the screens.
Start operation.
Install the support tool
in the computer.
(page 18)
(page 19)
(page 20)
·
(Host link: page 22)
·
(NT link: page 50)
(page 69)
·
For the host link, refer
to page 22 and the
manuals for the host
link unit and peripheral
tools.
·
For the NT link, refer to
page 50.