Omron NT11 - 01-2004, User Manual

Page: 122 / 186

109
Outline of Host Link/NT Link Operation
Section 5-2
!Caution Carefully check the operation of all screen data and host programs before
using them. Otherwise the system may operate unpredictably.
5-2 Outline of Host Link/NT Link Operation
This section describes the basics for operating the NT11 through communica-
tions with the PLC using the host link/NT link.
5-2-1 Equipment and Settings Used in This Chapter
The following equipment and settings are used in the examples in this Chap-
ter:
[Equipment] PT: NT11-SF121-EV1
Creating and Correcting a Screen
Saving a File
Save the created screen data to a file.
Transmitting the Screen Data
Transmit the created screen data to the PT. After
setting the PT in the Transmit mode, execute the
screen data transmission operation with the Support
Tool.
NT11 Support Tool
Setting the Clock Data Area
Set the address of the first word to allocate as the Clock
Data Area in the host so that the clock data can be read
from the host.
(NT21 only)
After designating a screen, set the screen properties and
register elements for the screen or correct the screen. If
necessary, create marks, image data, and library data, and
set the initial values of memory table entries.For details of
screens and elements, refer to
[Transmit Mode]
SECTION 4 NT11 Functions .