![background image](http://html.mh-extra.com/html/omron/ns-rev-12/ns-rev-12_setup-manual_744517052.webp)
2-2 Part Names and Functions
2-18
Connector Pin Arrangement of Serial Ports A and B
Pin number
Signal name
Name
1 NC
Not
connected.
2 SD
Send
data
3 RD
Receive
data
4
RS
Request to send
5
CS
Clear to send
6
+5V
5-V output (250 mA max.)
7 NC
Not
connected.
8 NC
Not
connected.
9 SG
Signal
ground
Precautions
for Correct Use
Make sure that the total current capacity of devices being supplied power is
250 mA max. before using the 5-V power supply from pin 6. The capacity of the
PT's 5-V output is 250 mA max. at 5 V ±5%.
Connector Pin Arrangement of Serial Port B (Isolated RS-422A) (NS15
Only)
Pin number
Signal name
Name
1
RDA
Receive data (-)
2
RDB
Receive data (+)
3
SDA
Send data (-)
4
RDB
Send data (+)
5
RSA
Request to send (-)
6
RSB
Request to send (+)
7
Functional ground
Precautions
for Correct Use
A screwdriver that is thin only at the tip will not fit all the way into the hole. Use
a small flat-blade screwdriver with a consistent thickness. The tightening torque
is 0.4 to 0.5 N
⋅
m.
Summary of Contents for NS - REV 12
