6-3 PT Settings
6-26
6-3-5
Backlight Brightness
NS15
The brightness of the backlight can be set to any of three levels or to an external adjustment.
The default setting is for
High
.
Perform the following procedure from the PT Operation Tab Page of the System Menu to set
the brightness of the backlight.
1. Select one of the three levels,
High
,
Middle
, or
Low
, or select
External
for the backlight
brightness.
2. Press
the
Write
Button. The setting will be saved.
3. If
External
is set, the following dialog box will be displayed to confirm writing the PT set-
tings when the
Write
Button is pressed.
Press the
Yes
Button to write the PT settings.
Press the
No
Button to cancel writing the PT settings.
4. The following confirmation dialog box will be displayed if the
Yes
Button is pressed.
Press the
OK
Button to write the PT settings, including the backlight bright-
ness.
If 15 s elapses without the
OK
Button being pressed or the Close Button is
pressed, the backlight brightness and other PT settings will not be written.
If
External
is selected, the external brightness adjustment of the NS15 can
be set. Refer to
3-10 External Brightness Adjustment
for information on the
external brightness adjustment connector.
Summary of Contents for NS - REV 12
