![background image](http://html.mh-extra.com/html/omron/ns-rev-12/ns-rev-12_setup-manual_744517060.webp)
3-1 Installing the PT
3-6
Reference
For the NS15 to provide IP65 oil-proof-type protection, at least the eight locations
shown in the following figure must be mounting with mounting brackets. There is a to-
tal of 16 mounting locations.
3-1-4
Connecting the Power Supply
Connect a 24-VDC power supply to the power input terminals.
Precautions
for Safe Use
•
Do not connect an AC power supply to the power terminals.
•
Use a DC power supply with low voltage fluctuation.
•
Do not perform a dielectric strength test.
•
To conform to EC Directives, use a DC power supply that will provide a sta-
ble output even if the input is momentarily interrupted for 10 ms, and that
has reinforced or double insulation.
•
Power Supply
The following table shows the specifications for the power supply that can be connected. De-
termine power supply specifications that meet the power supply capacity requirements.
Item Value
Power supply voltage
24 VDC
Allowable voltage range 20.4 to 27.6 VDC (24 VDC
±
15%)
Power supply capacity
45 W min. (NS15)
25 W min. (NS12, NS10, NS8)
15 W min. (NS5)
24 VDC
Breaker
Functional ground
Breaker
Functional
ground
24 VDC
power
supply
24 VDC power supply
24 VDC
NS15, 12, 10, 8
NS5
Summary of Contents for NS - REV 12
