Chapter 9: High Accuracy Positioning System
2. Put the AMR upright, and re-install the side covers.
3. Plug the splitter cable (Mini-Fit Jr™, included) into the AUX PWR port on the upper rear
core.
Figure 9-8
Upper Rear of Core, Showing AUX PWR Port
4. Plug the sensor power connector into one branch of the splitter cable.
This can power one or two sensors.
5. Plug the RS-232 connector(s) into the upper front of the core.
Figure 9-9
Upper Front of Core, Showing RS232 Ports
The front sensor plugs into RS-232-1.
13732-000 Rev J
LD Platform Peripherals Guide
137
