72
LD Platform Peripherals Guide
13732-000 Rev J
5.5 MobilePlanner Configuration
NOTE:
It may be simplest if you install one box at a time, and configure
that. This ensures that you know which box you are dealing with, so you
can assign the appropriate goal, for a call button, or appropriate map
data, for a door box. If you decide to install multiple call buttons or door
boxes before configuring them, refer to Identifying an Installed Call/Door
Box on page 73.
5. Enable the Mobile Call-Button/GPIO software using SetNetGo.
Figure 5-23
Enabling the GPIO Software
a. Access MobilePlanner > SetNetGo.
b. Select Software > Manage Installed Software.
c. Locate the package name Mobile Call-Button/GPIO Software from the listing.
Click the listing to expand the view.
d. Click the Enable check box.
e. Click OK to confirm that you wish to make the change.
