48
8. Press the Shift Key to display the set value
100
0
for changing.
Set Value LED Display Model
Basic Model
9. Press the Up and Shift Keys to set the value to
10-1
. The input will be vali-
dated automatically if no change is made for five seconds. The
ps.ay
pres-
caling value Y (exponent) of input A setting will be displayed again.
Note
Press the Mode Key to enter the set value immediately. The
decp
decimal point position setting will be displayed for setting the next pa-
rameter.
Set Value LED Display Model
Basic Model
10. Press the Mode Key to display the
decp
decimal point position setting.
Set Value LED Display Model
Basic Model
11. Press the Shift Key to display
%%%%%
for changing.
Set Value LED Display Model
Basic Model
12. Press the Shift Key to set
%%%%.%
. The input will be validated automatically if
no change is made for five seconds. The
decp
decimal point position setting
will be displayed again.
Note
Press the Mode Key to enter the set value immediately. The
p.bank
prescaling bank setting will be displayed for setting the next parame-
ter.
Set Value LED Display Model
Basic Model
When no operation is executed for five seconds
Set Value LED Display Model
Basic Model
Setting Mode
Section 4-2
Summary of Contents for K3NP
Page 1: ...K3NP Period Meter Operation Manual Produced January 1998...
Page 2: ...iv...
Page 4: ...vi...