![background image](http://html1.mh-extra.com/html/omron/k3np/k3np_operation-manual_743364099.webp)
91
6-3
Maintenance Mode
The set values of the K3NP can be initialized in maintenance mode. The opera-
tions of the K3NP in this mode are described below.
6-3-1 Maintenance Mode
·
The K3NP will be in maintenance mode if the Mode and Shift Keys are pressed
simultaneously while the K3NP is turned on.
·
The K3NP in maintenance mode will go into RUN mode if the Escape Key is
pressed.
RUN mode
Press the Mode and Shift Keys
while turning the K3NP on.
Power On
Press the Escape and Up
Keys for 1 second.
Maintenance mode
RUN mode
1 second
Setting mode
Protect mode
6-3-2 Initialization
Follow the steps described below to reset the set values of the K3NP to factory-
set values.
1, 2, 3...
1. Press the Mode and Shift Keys simultaneously while turning the K3NP on.
The
mant
maintenance mode setting will be displayed.
Set Value LED Display Model
Basic Model
2. Press the Mode Key for more than one second. The
re-in
initialization set-
ting will be displayed.
Set Value LED Display Model
Basic Model
3. Press the Up Key to display
no
.
Set Value LED Display Model
Basic Model
Maintenance Mode
Section 6-3
Summary of Contents for K3NP
Page 1: ...K3NP Period Meter Operation Manual Produced January 1998...
Page 2: ...iv...
Page 4: ...vi...