![background image](http://html1.mh-extra.com/html/omron/k3np/k3np_operation-manual_743364017.webp)
7
K3NP with RS-422 Output Board, K31-FLK3
Communications
Output Board
Terminator
Input Board
K3NP with Transistor Output Board, K31-FLK4
K3NP with RS-422 + Transistor Output Board, K31-FLK6
Communications
Output Board
Terminator
Input Board
Transistor
Output Board
1-4
Modes
The following four modes are available.
·
RUN mode for normal operations (see
Section 5 Operations in RUN Mode
)
·
Setting mode for initializing parameter input (see
Section 4 Parameter Setting
)
·
Protect mode for lock-out configuration (see
4-1 Protect Mode
)
·
Maintenance mode for initialization (see
6-3-2 Initialization
)
Refer to the following for the relationship among these modes and selection of
the modes.
RUN mode
Press the Mode and Shift Keys
while turning on the K3NP.
Power on
Press the Escape and up
Keys for 1 second.
Maintenance mode
RUN mode
1 second
Setting mode
Protect mode
RUN Mode
K3NP is in RUN when the K3NP is turned ON.
The K3NP in this mode provides an output signal as a result of the comparison of
the measured and setting values.
Modes
Section 1-4
Summary of Contents for K3NP
Page 1: ...K3NP Period Meter Operation Manual Produced January 1998...
Page 2: ...iv...
Page 4: ...vi...