8
The basic model in this mode usually displays the process value. The maximum
and minimum values are displayed by pressing the Escape Key. The parame-
ters and setting values are displayed by pressing the Mode Key.
Refer to
Section 5 Operations in RUN Mode
for RUN mode in detail.
Setting Mode
Values are set in the K3NP in this mode by key input or using the teaching func-
tion.
Refer to
Section 4 Parameter Setting
for value setting by key input and
6-1
Teaching Function
for the teaching function in detail.
Protect Mode
Use this mode to prohibit some operations in order to lock out the setting values.
Refer to
4-1 Protect Mode
for details.
Maintenance Mode
The setting values are reset to factory-set values in this mode. Refer to
6-3-2
Initialization
for details.
1-5
Communications Function
The communications function of the K3NP makes it possible for the host com-
puter to perform the following operations.
·
Confirmation and change of setting values. Communications conditions can-
not be changed.
·
Reading and resetting the maximum and minimum values.
·
Forced-zero setting and resetting.
·
Confirmation of model data.
Use a model with a Communications Board if the communications function is
required.
Refer to the
Communications Manual
for the communications function in detail.
RS-232C
Use the K31-FLK1 or K31-FLK4 Output Board to use the RS-232C interface.
RS-422
Use the K31-FLK3 or K31-FLK6 Output Board to use the RS-422 interface.
RS-485
Use the K31-FLK2 or K31-FLK5 Output Board to use the RS-485 interface.
Communications Function
Section 1-5
Summary of Contents for K3NP
Page 1: ...K3NP Period Meter Operation Manual Produced January 1998...
Page 2: ...iv...
Page 4: ...vi...
