59
3. Press the Shift Key to display the prior set value
7
for changing. The PROG
indicator will flash.
Set Value LED Display Model
Basic Model
4. Press the Up Key to set the value to
8
. The input value will be validated auto-
matically if no change is made for five seconds. The
len
word length setting
will be displayed again.
Note
Press the Mode Key to enter the set value immediately. The next pa-
rameter will be displayed for setting.
Set Value LED Display Model
Basic Model
5. Press the Mode Key to display the
sbit
stop bit setting.
Set Value LED Display Model
Basic Model
6. Press the Shift Key to display the set value
2
for changing.
Set Value LED Display Model
Basic Model
7. Press the Up Key to set the value to
1
. The input will be validated automati-
cally if no change is made for five seconds. The
sbit
stop bit setting will be
displayed again.
Note
Press the Mode Key to enter the set value immediately. The next pa-
rameter will be displayed for setting.
Set Value LED Display Model
Basic Model
8. Press the Mode Key to display the
prty
parity bit setting.
Set Value LED Display Model
Basic Model
9. Press the Shift Key to display
eUen
for changing.
Set Value LED Display Model
Basic Model
Setting Mode
Section 4-2
Summary of Contents for K3NP
Page 1: ...K3NP Period Meter Operation Manual Produced January 1998...
Page 2: ...iv...
Page 4: ...vi...
