![background image](http://html1.mh-extra.com/html/omron/k3np/k3np_operation-manual_743364048.webp)
39
4-2
Setting Mode
4-2-1 Selecting Setting Mode
·
The K3NP in RUN mode will go into setting mode if the Mode Key is pressed for
1 s minimum.
·
The K3NP in setting mode will go into RUN mode if the Escape Key is pressed.
RUN mode
Press the Mode and Shift Keys
while turning the K3NP on.
Power On
Press the Escape and Up
Keys for 1 second.
Maintenance mode
RUN mode
1 second
Setting mode
Protect mode
·
The menu in each mode changes whenever the Mode Key is pressed.
·
If the Mode Key is pressed for more than one second while a menu is dis-
played, a parameter will be displayed.
·
The parameter changes whenever the Mode Key is pressed.
·
If the Shift Key is pressed while a parameter is displayed, the parameter will be
ready to change.
·
Press the Up Key to change parameters.
·
The digit of a set value is selected with the Shift Key and changed with the Up
Key.
·
The PROG indicator is lit while a menu or parameter is displayed.
·
The PROG indicator flashes during a set value change.
Note
If the operating mode is changed, all the other parameters will be set to default
values except for communication settings and set values in protect mode.
Therefore, set the operating mode and sensor type first.
Setting Mode
Section 4-2
Summary of Contents for K3NP
Page 1: ...K3NP Period Meter Operation Manual Produced January 1998...
Page 2: ...iv...
Page 4: ...vi...