![background image](http://html1.mh-extra.com/html/omron/k3np/k3np_operation-manual_743364061.webp)
52
Sensor Type
·
Specifies the type of sensors for input A and input B.
·
The sensor type of input B cannot be selected if the operating mode of the
K3NP is set to
f2
(cycle) or
f4
(elapsed time).
·
Open Collector Input
Sensor type
Normally open
Normally closed
Default
Transistor input
00
01
00
Relay input
10
11
Normally Open Model: The sensor output is OFF (open) when the sensor is
not sensing an object.
Normally Closed Model: The sensor output is ON (closed) when the sensor is
not sensing an object.
·
Voltage Pulse Input
Sensor type
Active high (H)
Active low (L)
Default
Transistor input
00
01
00
Follow the steps described below to set input A to
11
in operating mode
f1
(passing
speed).
Set Value LED Display Model
Basic Model
1, 2, 3...
1. Press the Mode Key for more than one second while the
setup
setup menu
is displayed. The
func
operating mode setting will appear.
Set Value LED Display Model
Basic Model
2. Press the Mode Key to display
ina
input A sensor type setting.
Set Value LED Display Model
Basic Model
3. Press the Shift Key to display
00
for changing. The PROG indicator will flash.
Set Value LED Display Model
Basic Model
ina
inb
FUNCTION
SETTING
SETTING
EXAMPLE
Setting Mode
Section 4-2
Summary of Contents for K3NP
Page 1: ...K3NP Period Meter Operation Manual Produced January 1998...
Page 2: ...iv...
Page 4: ...vi...