![background image](http://html1.mh-extra.com/html/omron/k3np/k3np_operation-manual_743364104.webp)
96
Connection Example
Process Meter
SYSMAC Programmable Controller
DC Input Unit
In
te
rnal
ci
rc
uit
Transistor Output Unit
In
te
rnal
ci
rc
uit
DC power supply
23.D
S
V
Note
1. Connect RD2-1 through RD2-4, RS3-1 through RS3-4, RD4-1 through
RD4-4, and RD5-1 through RD5-4 in the same way as RD1-1 through
RD1-4.
2. Connect the RUN and OVER signals if they are used as status data.
Signals
When the HOLD signal is ON, the measurement operation stops and the pro-
cess value input effective immediately before the HOLD signal is retained.
When the RESET signal is ON, the maximum and minimum values are set to the
process value.
The OVER signal is ON when the input value is not within the display range.
Connectors
Section 7-1
Summary of Contents for K3NP
Page 1: ...K3NP Period Meter Operation Manual Produced January 1998...
Page 2: ...iv...
Page 4: ...vi...