84
1, 2, 3...
1. The process value 401 is displayed.
Set Value LED Display Model
Basic Model
2. Press the Escape Key to display the maximum value 1024 and light the MAX
indicator.
Set Value LED Display Model
Basic Model
3. Press the RESET/TEACH Key to set the maximum and minimum values to
the process value 401.
Set Value LED Display Model
Basic Model
4. Press the Escape Key to check that the minimum value is set to 401.
Set Value LED Display Model
Basic Model
5-3
External Input Signals
5-3-1 Bank Selection
·
The K3NP uses BANK1 and BANK2 signals to select the setting value, pres-
caling value, and decimal point position of the bank 1, 2, 3, or 4.
Refer to the following for the relationship between bank input signals and bank
numbers.
Bank no.
Control input
Comparative set value
Prescaling value
BANK 1
BANK 2
p
g
1
OFF
OFF
sU1.
**
ps1.
**
2
ON
OFF
sU2.
**
ps2.
**
3
OFF
ON
sU3.
**
ps3.
**
4
ON
ON
sU4.
**
ps4.
**
Note
If the prescaling bank is set to OFF, the
pscl
prescaling value for each bank will
be fixed.
·
When a bank is selected, the corresponding BANK indicator 1, 2, 3, or 4 will be
lit.
SETTING
EXAMPLE
External Input Signals
Section 5-3
Summary of Contents for K3NP
Page 1: ...K3NP Period Meter Operation Manual Produced January 1998...
Page 2: ...iv...
Page 4: ...vi...
